Offshore wind turbine

Revision as of 21:31, 26 August 2015 by J.williams (talk | contribs) (1 revision imported)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Figure 1. Offshore wind turbines.[1]

Offshore wind turbines operate by transforming the kinetic energy in wind over water into rotational kinetic energy which is used to generate electricity. Turbines can be installed both in ocean waters and inland lakes and are typically around 80-100 meters high with a rotor blade diameter of 20-50 meters.[2]

Types

Fixed-Bottom Turbines

Fixed-bottom turbines are similar in design to onshore wind turbines where the turbine tower is built up from the ground. Fixed-bottom turbines are limited by the depth of the water because the turbine tower has to be built into the sea-floor; fixed-bottom turbines are only viable in depths up to 50 m.[3] Suitable construction sites are relatively limited and have the potential to interfere with other industries such as shipping or fishing. Fixed-bottom turbines are currently the industry standard for offshore wind farms.[3]

Floating Turbines

Research is ongoing into the development of floating turbine designs. Floating turbines are of interest because potential development sites would no longer be limited to shallow waters. Floating turbines could be positioned in areas with the strongest winds without being limited by water depth.[4] In addition, some areas such as the Mediterranean and Arctic that are too deep to allow fixed-bottom turbine construction to be suitable for development.[4]

The challenge of floating turbines is to create structures that are capable of withstanding the forces of high wind speeds and open-ocean waves without a foundation built into the sea-floor. Technological development is currently focused on improving the substructure, which is the floating platform the tower is constructed on.[5] The substructure must be capable to holding the tower steady and upright while remaining in the same location via a system of cables anchored to the sea floor.[5] To date, several floating turbines have been designed but are still limited to a water depth of around 200 m because of the necessity for an anchoring system to hold the turbine in place.[4]

References

  1. Wikimedia Commons [Online], Available: https://commons.wikimedia.org/wiki/File:Barrow_Offshore_wind_turbines.jpg#/media/File:Barrow_Offshore_wind_turbines.jpg
  2. Windustry (2012). (Accessed August 21, 2015). How Big are Wind Turbines? [Online] Available: http://www.windustry.org/resources/how-big-are-wind-turbines
  3. 3.0 3.1 T. Rowe (2013). (Accessed August 21, 2015). Significance of Deep Water Report is Technological Advance in Offshore Wind [Online]. Available: http://www.ewea.org/blog/2013/08/significance-of-deep-water-report-is-technological-advance-in-offshore-wind/
  4. 4.0 4.1 4.2 E. Harball (2013). (Accessed August 21, 2015). Will Ore. Test project bring offshore wind to the West Coast [Online]. Available: http://www.eenews.net/stories/1059988558
  5. 5.0 5.1 EWEA (2013). (Accessed August 21, 2015). Deep Water [Online]. Available: http://www.ewea.org/fileadmin/files/library/publications/reports/Deep_Water.pdf