Fish screen: Difference between revisions

m (1 revision imported)
energy>Jmdonev
No edit summary
Line 1: Line 1:
[[Category:Done 2015-09-06]]
[[Category:Done 2021-01-31]]  
[[File:Fish_screen-Redlands_Canal.jpg|400px|framed|right|Figure 1. A fish screen by a canal.<ref>Wikimedia Commons. (August 24, 2015). ''Fish screen'' [Online]. Available: https://commons.wikimedia.org/wiki/File:Fish_screen-Redlands_Canal.jpg</ref>]]
[[File:Fish_screen-Redlands_Canal.jpg|400px|framed|right|Figure 1. A fish screen by a canal.<ref>Wikimedia Commons. (August 24, 2015). ''Fish screen'' [Online]. Available: https://commons.wikimedia.org/wiki/File:Fish_screen-Redlands_Canal.jpg</ref>]]


<onlyinclude>A '''fish screen''' is a structure built to prevent fish from entering [[hydroelectric dam]]s, aqueducts, diversion rivers, or other man-made structures. These screens are meant to supply [[water]] free of debris to [[power plant]]s and other facilities without harming aquatic life.</onlyinclude> Although these screens are built with the goal of preventing fish from being harmed if they enter dams or aqueducts, the collision of fish with the screen can sometimes hurt the fish.<ref name="RE1">Department of Fisheries and Oceans. (August 24, 2015). ''Freshwater Intake End-of-Pipe Fish Screen Guideline'' [Online]. Available: http://www.dfo-mpo.gc.ca/Library/223669.pdf</ref>
<onlyinclude>A '''fish screen''' is a structure built to prevent fish from entering [[hydroelectric dam]]s, aqueducts, diversion rivers, or other man-made waterway structures. These screens are meant to supply [[water]] free of debris to [[power plant]]s and other facilities without harming aquatic life.</onlyinclude> Although these screens are built with the goal of preventing fish from being harmed if they enter dams or aqueducts, the collision of fish with the screen can sometimes hurt the fish.<ref name="RE1">Department of Fisheries and Oceans. (August 24, 2015). ''Freshwater Intake End-of-Pipe Fish Screen Guideline'' [Online]. Available: http://www.dfo-mpo.gc.ca/Library/223669.pdf</ref>


Fish screens can be round, square, or rectangular in shape. However, they must not include any sort of sharp protrustion that could injure fish that collide with the screen. Generally, fish screens are made of some material that allows water to flow through the screen while blocking fish and debris from flowing through. They can be made of perforated [[metal]], netting, or fence-wire. Metals that can be used to make fish screens include brass, bronze, [[aluminum]], galvanized or stainless steel, and plastics.<ref name="RE1"/> Whichever material is used, the screen must be resistant to corrosion and deterioration as a result of exposure to [[ultraviolet]] [[light]].
Fish screens can be round, square, or rectangular in shape. However, they must not include any sort of sharp protrusion that could injure fish that collide with the screen and are made of some material that allows water to flow through the screen while blocking fish and debris from flowing through. Types of materials used include perforated [[metal]], netting, or fence-wire. Metals that can be used to make fish screens include brass, bronze, [[aluminum]], galvanized or stainless steel, and plastics.<ref name="RE1"/> Whichever material is used, the screen must be resistant to corrosion and deterioration as a result of exposure to [[ultraviolet]] [[light]].


==Installation and Maintenance==  
==Installation and Maintenance==  
The proper installation of fish screens is vitally important in ensuring that they function properly. These screens should be located in areas that see relatively low fish traffic throughout the year. As well, these screens should be located away from structures that could attract fish that are migrating or spawning. Additionally, the screens should be located slightly above the bottom of the waterway to ensure excessive amounts of sediment or bottom-dwelling organisms are not scooped into the screen.
The proper installation of fish screens is vitally important in ensuring that they proper function. These screens should be located in areas that see relatively low fish traffic throughout the year, and located away from structures that could attract fish that are migrating or spawning. The screens should sit slightly above the bottom of the waterway to ensure excessive amounts of sediment or bottom-dwelling organisms are not scooped into the screen.


As well, these screens must be cleaned and maintained regularly to ensure that excessive debris does not accumulate on the screens and produce conditions that could harm fish. These screens are removed and cleaned with air or water, and can be pressure washed or scrubbed. A suction pipe can be used to easily remove debris from the screen.
These screens must be cleaned and maintained regularly to ensure that excessive debris does not accumulate on the screens and produce conditions that could harm fish. These screens are removed and cleaned with air or water, and can be pressure washed or scrubbed. A suction pipe can be used to easily remove debris from the screen.
 
== For Further Reading ==
For further information please see the related pages below:
* [[Hydropower]]
* [[Hydroelectricity]]
* [[Hydrologic cycle]]
* [[Environmental impacts of hydropower]]
* [[Fish passage]]


==References==
==References==
{{reflist}}[[Category:Uploaded]]
{{reflist}}[[Category:Uploaded]]
[[category: Ed edit]]

Revision as of 23:39, 27 May 2021

Figure 1. A fish screen by a canal.[1]

A fish screen is a structure built to prevent fish from entering hydroelectric dams, aqueducts, diversion rivers, or other man-made waterway structures. These screens are meant to supply water free of debris to power plants and other facilities without harming aquatic life. Although these screens are built with the goal of preventing fish from being harmed if they enter dams or aqueducts, the collision of fish with the screen can sometimes hurt the fish.[2]

Fish screens can be round, square, or rectangular in shape. However, they must not include any sort of sharp protrusion that could injure fish that collide with the screen and are made of some material that allows water to flow through the screen while blocking fish and debris from flowing through. Types of materials used include perforated metal, netting, or fence-wire. Metals that can be used to make fish screens include brass, bronze, aluminum, galvanized or stainless steel, and plastics.[2] Whichever material is used, the screen must be resistant to corrosion and deterioration as a result of exposure to ultraviolet light.

Installation and Maintenance

The proper installation of fish screens is vitally important in ensuring that they proper function. These screens should be located in areas that see relatively low fish traffic throughout the year, and located away from structures that could attract fish that are migrating or spawning. The screens should sit slightly above the bottom of the waterway to ensure excessive amounts of sediment or bottom-dwelling organisms are not scooped into the screen.

These screens must be cleaned and maintained regularly to ensure that excessive debris does not accumulate on the screens and produce conditions that could harm fish. These screens are removed and cleaned with air or water, and can be pressure washed or scrubbed. A suction pipe can be used to easily remove debris from the screen.

For Further Reading

For further information please see the related pages below:

References

  1. Wikimedia Commons. (August 24, 2015). Fish screen [Online]. Available: https://commons.wikimedia.org/wiki/File:Fish_screen-Redlands_Canal.jpg
  2. 2.0 2.1 Department of Fisheries and Oceans. (August 24, 2015). Freshwater Intake End-of-Pipe Fish Screen Guideline [Online]. Available: http://www.dfo-mpo.gc.ca/Library/223669.pdf